Landmark bath

The Landmark bath is based on a classic boat bath design from the 18th and 19th century. Our modern version is made from solid single cast Touchstone, a revolutionary material that creates natural curves and strength, and has a sumptuous soft tactile feel. This bath also benefits from eco credentials of thermally efficient modern materials to keep the bath water warmer, longer.

This traditional bath has a rollover rim, which allows a generous internal bathing area that’s far larger than the external size would suggest. The bottom of the bath goes down to the floor, allowing for a super deep internal bathing area of 510mm. This means it has 30-35% more internal bathing volume than similar sized baths. The bath ends are 660mm high, while the middle is only 550mm for easy access.

The exterior has a lacquered ‘gun metal’ finish to mimic the classical pewter finish of period boat bath design. This roll top bath has no tap holes and can only be used with floor standing bath fillers or wall mounted bath taps. We recommend that it is used with our Bensham floor mounted bath shower mixer or bath filler, which both have a Touchstone shelf behind the tap that’s ideal for placing your bubble bath or champagne glasses.

Technical Diagrams (1)
Installation Manuals (1)

Landmark bath

• Length: 1690mm
• Width: 750mm
• Depth: 660mm

Water capacity: 205 litres

Material thickness: max. 25mm

Comes without tap holes. Must be used with floorstanding or wall mounted bath taps.

Rim thickness: 18mm

Made using a solid cast and supplied as one piece. Manufactured from Touchstone, a solid surface material, with a gun metal lacquered finish.

Floorstanding, so plumbing must be below floor level.

Comes with an oveflow hole and supplied with a slotted waste.

Internal bathing depth: 510mm

Weight: 112kg