ShowerTime Thermaform bath

The Thermoform ShowerTime bath is designed for dual use. Its 1700mm long and 750mm wide and has a capacity of 152 Litres.

This bath is part of our Thermaform range - a method of construction which not only adds extra weight and rigidity to the construction of the bath, but also improves the thermal efficiency of the bath by over 50% compared to a standard acrylic bath. This means the water remains warm for longer - enjoy the bath and look after the environment at the same time!

It still has all the benefits of an acrylic bath, and is designed to be more suitable for showering. It has an enlarged area to create extra standing space and is cleverly designed so the water drains to the plughole which is away from the standing area. At the tap end the acrylic is reinforced, giving a more solid base for showering. To add to its appeal, the tap end is gently sloped so you can also use it as a double ended bath.

This is achieved partly by making the rim of the bath is narrower than other baths, and as a consequence there is a very tight clearance for the overflow pipe work. If the bath is fitted with the overflow next to the panel side, then an acrylic panel must be used. If the bath is fitted with the overflow on the wall side then any panel, including wooden, can be used.

ShowerTime Thermaform bath

• Length: 1700mm
• Width: 750mm
• Height: 580-610mm

N.B No tap holes. Tap holes can be drilled on site by your installer. Compatible with pool bath panels as well.

Capacity 152 litres.